TU DIEN10 TU DIEN09 TU DIEN07 TU DIEN01 CENTORK07 CENTORK06 CENTORK04 CENTORK03 ABB15 ABB13 ABB12 ABB05 Van bướm Van tay quay Unik DN500 Van bướm tay quay Unik DN450 UKV - 2012R Van bướm tay quay Unik DN400 Van bướm tay quay Unik DN350 UKV - 2012R Van bướm tay quay Unik DN300 Van bướm tay quay Unik DN250 Van bướm tay quay Unik DN200 Van bướm tay quay Unik DN150

Đang truy cập: 311
Trong ngày: 564
Trong tuần: 803
Lượt truy cập: 1718857

Mật khẩu
Nhớ mật khẩu

Quên mật khẩu | Đăng ký

The CENTORK electric actuators are compact units that, due to their modular design, can be applied to the actuation of any kind of valve.
The main purpose of the Centronik controls is to simplify the switching and control of the electric actuators, reducing the costs and times of the design of the electrical control system of the plant, the installation and commisioning or coordination with the electric actuators.

In this sense the next step for improvement and cost reduction is the use of FieldBus systems. See drawing with the evolution of the electric actuators controls.

Following with these last technologies, Centork is offering several options to control the actuators and to integrate them into standard FieldBus systems.

The Centronik controls are offered in 2 different versions, depending on the electric actuator application:
          Centronik Modulating

Due to its modular design, the Centronik unit can add different functions, can incorporate different remote communication modes and the adaptation to different standards can be easily achieved.

The Centronik modulating control is the solution used in control aplications with an analog input signal (0/4-20 mA. or 0-10 V.).

The Centronik Modulating control can be used in combination with the 400 and 460 series multiturn actuators and with the 480 series quarter-turn actuators.

The Centronik unit separated mounting (optional) is another important characteristic for aplications where the temperature, vibration or mounting conditions makes the direct mounting on the actuator difficult.

With the use of the latest electronic technologies microprocessor based, the Centronik unit allows the next innovative functions:

  • Programmable functions by frontal keyboard.
  • Local 2 dígits Display for an easy setting, commisioning and communication.
  • Operational datas recording (number of starts, number of torque operations, operating times, etc.), for predective maintenance.
  • Easy adaptation to several different FieldBus communication standards.

Main functions and characteristics:

  • Modular and programable concept due to the use of microprocessor technology
  • Non intrusive Local controls (OPEN, STOP, CLOSE, DES) with LOCAL/REMOTE selector protected by lock.
  • Local Indication with 5 LEDS
  • Local Display with 2 digits for an easy commisioning and communication
  • Motor power control by reversing contactors or thyristors (option)
  • Automatic phase correction and autodiagnostic capabilities
  • 24 VDC power supply.
  • IP67 or IP68 (option) wheatherproof protection.
  • Eex ATEX protection optional.
  • Remote digital communication by FieldBus (option): PROFIBUS, DeviceNet, MODBUS.
  • Electrical connection by terminal or plug-socket.

Download catalogue

Phản hồi

Người gửi / điện thoại

Nội dung


Cấu hình chữ chạy để sử dụng chức năng này



Office: 217A Quach Dinh Bao Str, Phu Thanh Wad, Tan Phu Dist, HCMC, VietNam

Add: 15 Le Thiet Str, Phu Tho Hoa Ward, Tan Phu Dist, HCMC, Vietnam

Tel: (+84 28) 6267 5677  -  Fax: (+84 28) 6265 5066

Email: info@hopviet.vn  -  Website: www.hopviet.vn

Hotline: +84 903056455